4130 Tubing in Ireland, France, Mexico, Hong Kong, Bhutan, Netherlands, Lithuania, Finland, Portugal, Qatar, Iraq, Lebanon, Romania, Libya, Sri Lanka, South Korea, Sweden, Oman, Bulgaria, Mongolia, Japan and more.
Grade 4130 is a low alloy steel with additional reinforcement such as chromium and molybdenum added to its composition. The AISI 4130 Tubing is more amenable to treatments using heat or mechanical means than traditional carbon steels. The AISI 4130’s reduced carbon content makes for better welding processes.
List of Contents
Alloy 4130 Steel Seamless Tubing, AISI 4130 Steel Tubing Manufacturer and Supplier
Siddhgiri Tubes is a well-known 4130 Steel Tubing Manufacturer and Supplier in India. 4130 Tubings are frequently provided in any of the following shapes: square, round, rectangular, as well as portions of a particular kind. A heat analysis could be used to limit the specified sections of the elements.
Alloy 4130 steel Seamless Tubing is a popular choice for structural applications due to its high strength and ability to be hardened. When low alloy steel is produced in accordance with ASTM A519 specification, it is either hot finished or cold finished.
The ASTM A519 Grade 4130 Tubing may be strand cast or cast in ingots if it is to be used as a component of mechanical tubing. Usually, steel is heated in order to create 4130 Alloy Steel Seamless Tubing. These hot-worked tubular pipes, if necessary, are then cold-finished to create the desired dimensions, shape, or qualities.
AISI 4130 Chromoly Tubing Size in Stock
| AISI 4130 CHROMOLY TUBING SIZE IN STOCK |
|---|
| OD X THICK |
| 1/4” OD x 0.035” ( 6.35 MM OD X 0.9 MM ) |
| 1/4” OD x 0.04” ( 6.35 MM OD X 1 MM ) |
| 1/4” OD x 0.05” ( 6.35 MM OD X 1.25 MM ) |
| 1/4” OD x 0.06” ( 6.35 MM OD X 1.5 MM ) |
| 1/4” OD x 0.08” ( 6.35 MM OD X 2 MM ) |
| 8 MM OD X 0.9 MM |
| 8 MM OD X 1 MM |
| 8 MM OD X 1.25 MM |
| 8 MM OD X 1.5 MM |
| 8 MM OD X 2 MM |
| 3/8” OD x 0.035” ( 9.5 MM OD X 0.9 MM ) |
| 3/8” OD x 0.04” ( 9.5 MM OD X 1 MM ) |
| 3/8” OD x 0.05” ( 9.5 MM OD X 1.25 MM ) |
| 3/8” OD x 0.06” ( 9.5 MM OD X 1.5 MM ) |
| 3/8” OD x 0.08” ( 9.5 MM OD X 2 MM ) |
| 10 MM OD X 0.9 MM |
| 10 MM OD X 1 MM |
| 10 MM OD X 1.25 MM |
| 10 MM OD X 1.5 MM |
| 10 MM OD X 2 MM |
| 1/2” OD x 0.035” ( 12.7 MM OD X 0.9 MM ) |
| 1/2” OD x 0.04” ( 12.7 MM OD X 1 MM ) |
| 1/2” OD x 0.05” ( 12.7 MM OD X 1.25 MM ) |
| 1/2” OD x 0.06” ( 12.7 MM OD X 1.5 MM ) |
| 1/2” OD x 0.08” ( 12.7 MM OD X 2 MM ) |
| 5/8” OD x 0.035” ( 15.88 MM OD X 0.9 MM ) |
| 5/8” OD x 0.04” ( 15.88 MM OD X 1 MM ) |
| 5/8” OD x 0.05” ( 15.88 MM OD X 1.25 MM ) |
| 5/8” OD x 0.06” ( 15.88 MM OD X 1.5 MM ) |
| 5/8” OD x 0.08” ( 15.88 MM OD X 2 MM ) |
| 16 MM OD X 0.9 MM |
| 16 MM OD X 1 MM |
| 16 MM OD X 1.25 MM |
| 16 MM OD X 1.5 MM |
| 16 MM OD X 2 MM |
| 18 MM OD X 0.9 MM |
| 18 MM OD X 1 MM |
| 18 MM OD X 1.25 MM |
| 18 MM OD X 1.5 MM |
| 18 MM OD X 2 MM |
| 3/4” OD x 0.035” ( 19.05 MM OD X 0.9 MM ) |
| 3/4” OD x 0.04” ( 19.05 MM OD X 1 MM ) |
| 3/4” OD x 0.05” ( 19.05 MM OD X 1.25 MM ) |
| 3/4” OD x 0.06” ( 19.05 MM OD X 1.5 MM ) |
| 3/4” OD x 0.08” ( 19.05 MM OD X 2 MM ) |
| 7/8” OD x 0.035” ( 22.2 MM OD X 0.9 MM ) |
| 7/8” OD x 0.04” ( 22.2 MM OD X 1 MM ) |
| 7/8” OD x 0.05” ( 22.2 MM OD X 1.25 MM ) |
| 7/8” OD x 0.06” ( 22.2 MM OD X 1.5 MM ) |
| 7/8” OD x 0.08” ( 22.2 MM OD X 2 MM ) |
| 1” OD x 0.035” ( 25.4 MM OD X 0.9 MM ) |
| 1” OD x 0.04” ( 25.4 MM OD X 1 MM ) |
| 1” OD x 0.05” ( 25.4 MM OD X 1.25 MM ) |
| 1” OD x 0.06” ( 25.4 MM OD X 1.5 MM ) |
| 1” OD x 0.08” ( 25.4 MM OD X 2 MM ) |
| 1” OD x 0.095” ( 25.4 MM OD X 2.5 MM ) |
| 1” OD x 0.12” ( 25.4 MM OD X 3 MM ) |
| 1.1” OD x 0.035” ( 28.2 MM OD X 0.9 MM ) |
| 1.1” OD x 0.04” ( 28.2 MM OD X 1 MM ) |
| 1.1” OD x 0.05” ( 28.2 MM OD X 1.25 MM ) |
| 1.1” OD x 0.06” ( 28.2 MM OD X 1.5 MM ) |
| 1.1” OD x 0.08” ( 28.2 MM OD X 2 MM ) |
| 1.1” OD x 0.095” ( 28.2 MM OD X 2.5 MM ) |
| 1.1” OD x 0.12” ( 28.2 MM OD X 3 MM ) |
| 1.15” OD x 0.035” ( 29.2 MM OD X 0.9 MM ) |
| 1.15” OD x 0.04” ( 29.2 MM OD X 1 MM ) |
| 1.15” OD x 0.05” ( 29.2 MM OD X 1.25 MM ) |
| 1.15” OD x 0.06” ( 29.2 MM OD X 1.5 MM ) |
| 1.15” OD x 0.08” ( 29.2 MM OD X 2 MM ) |
| 1.15” OD x 0.095” ( 29.2 MM OD X 2.5 MM ) |
| 1.15” OD x 0.12” ( 29.2 MM OD X 3 MM ) |
| 1.25” OD x 0.035” ( 31.75 MM OD X 0.9 MM ) |
| 1.25” OD x 0.04” ( 31.75 MM OD X 1 MM ) |
| 1.25” OD x 0.05” ( 31.75 MM OD X 1.25 MM ) |
| 1.25” OD x 0.06” ( 31.75 MM OD X 1.5 MM ) |
| 1.25” OD x 0.08” ( 31.75 MM OD X 2 MM ) |
| 1.25” OD x 0.095” ( 31.75 MM OD X 2.5 MM ) |
| 1.25” OD x 0.12” ( 31.75 MM OD X 3 MM ) |
| 1.5” OD x 0.035” ( 38.1 MM OD X 0.9 MM ) |
| 1.5” OD x 0.04” ( 38.1 MM OD X 1 MM ) |
| 1.5” OD x 0.05” ( 38.1 MM OD X 1.25 MM ) |
| 1.5” OD x 0.06” ( 38.1 MM OD X 1.5 MM ) |
| 1.5” OD x 0.08” ( 38.1 MM OD X 2 MM ) |
| 1.5” OD x 0.095” ( 38.1 MM OD X 2.5 MM ) |
| 1.5” OD x 0.12” ( 38.1 MM OD X 3 MM ) |
| 1.75” OD x 0.035” ( 44.5 MM OD X 0.9 MM ) |
| 1.75” OD x 0.04” ( 44.5 MM OD X 1 MM ) |
| 1.75” OD x 0.05” ( 44.5 MM OD X 1.25 MM ) |
| 1.75” OD x 0.06” ( 44.5 MM OD X 1.5 MM ) |
| 1.75” OD x 0.08” ( 44.5 MM OD X 2 MM ) |
| 1.75” OD x 0.095” ( 44.5 MM OD X 2.5 MM ) |
| 1.750” OD x 0.12” ( 44.5 MM OD X 3 MM ) |
| 2” OD x 0.035” ( 50.8 MM OD X 0.9 MM ) |
| 2” OD x 0.04” ( 50.8 MM OD X 1 MM ) |
| 2” OD x 0.05” ( 50.8 MM OD X 1.25 MM ) |
| 2” OD x 0.06” ( 50.8 MM OD X 1.5 MM ) |
| 2” OD x 0.08” ( 50.8 MM OD X 2 MM ) |
| 2” OD x 0.095” ( 50.8 MM OD X 2.5 MM ) |
| 2” OD x 0.12” ( 50.8 MM OD X 3 MM ) |
Chemical Composition
| Element | Content (%) |
|---|---|
| Iron, Fe | 97.03 – 98.22 |
| Chromium, Cr | 0.80 – 1.10 |
| Manganese, Mn | 0.40 – 0.60 |
| Carbon, C | 0.280 – 0.330 |
| Silicon, Si | 0.15 – 0.30 |
| Molybdenum, Mo | 0.15 – 0.25 |
| Sulfur, S | 0.040 |
| Phosphorous, P | 0.035 |
Physical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.85 g/cm3 | 0.284 lb/in³ |
| Melting point | 1432°C | 2610°F |
Mechanical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength, ultimate | 560 MPa | 81200 psi |
| Tensile strength, yield | 460 MPa | 66700 psi |
| Modulus of elasticity | 190-210 GPa | 27557-30458 ksi |
| Bulk modulus (Typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (Typical for steel) | 80 GPa | 11600 ksi |
| Poissons ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 21.50% | 21.50% |
| Reduction of area | 59.6 | 59.60% |
| Hardness, Brinell | 217 | 217 |
| Hardness, Knoop (Converted from Brinell hardness) | 240 | 240 |
| Hardness, Rockwell B (Converted from Brinell hardness) | 95 | 95 |
| Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.) | 17 | 17 |
| Hardness, Vickers (Converted from Brinell hardness) | 228 | 228 |
| Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.) | 70 | 70 |
AISI 4130 Tubing Size Chart (AISI 4130 Tubing Dimensions, NB Size Schedule)
AISI 4130 Tubing Dimensions Chart
| O.D.(mm) x Thickness(mm) | O.D(mm) x Thickness(mm) | O.D(mm) x Thickness(mm) |
|---|---|---|
| 38.1 x 3.2 | 57.0 x 4.9 | 76.2 x 4.0 |
| 38.1 x 4.0 | 57.0 x 6.3 | 76.2 x 5.0 |
| 38.1 x 6.3 | 57.0 x 7.9 | 76.2 x 6.3 |
| 42.4 x 3.2 | 60.3 x 3.2 | 82.5 x 4.5 |
| 42.4 x 4.0 | 60.3 x 3.6 | 88.9 x 3.2 |
| 44.5 x 3.2 | 60.3 x 5.0 | 88.9 x 3.6 |
| 44.5 x 6.3 | 63.5 x 3.2 | 88.9 x 4.0 |
| 48.3 x 3.2 | 63.5 x 3.6 | 101.6 x 3.6 |
| 48.3 x 3.6 | 63.5 x 4.0 | 101.6 x 4.5 |
| 50.8 x 4.5 | 63.5 x 6.3 | 101.6 x 6.3 |
| 51.0 x 3.2 | 63.5 x 7.9 | 114.3 x 3.6 |
| 51.0 x 3.6 | 70.0 x 3.2 | 114.3 x 5.0 |
| 51.0 x 6.3 | 70.0 x 3.6 | 139.7 x 4.0 |
| 57.0 x 3.2 | 70.0 x 6.3 | 139.7 x 5.0 |
| 57.0 x 3.6 | 76.2 x 3.6 | 139.7 x 6.3 |
AISI 4130 Tubing NB Size Schedule Chart
| NB | Size | OD | 40S | 5S | 10S | S10 | S20 | S40 | S60 | XS/80S | S80 | S100 | S120 | S140 | S160 | XXS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
| 1/8” | 10.29 | 1.2 | 1.73 | 2.41 | ||||||||||||
| 1/4” | 13.72 | 1.7 | 2.24 | 3.02 | ||||||||||||
| 3/8” | 17.15 | 1.7 | 2.31 | 3.2 | ||||||||||||
| 15 | 1/2” | 21.34 | 2.8 | 1.7 | 2.1 | 2.77 | 3.73 | 3.73 | 4.78 | 7.47 | ||||||
| 20 | 3/4” | 26.67 | 2.9 | 1.7 | 2.1 | 2.87 | 3.91 | 3.91 | 5.56 | 7.82 | ||||||
| 25 | 1” | 33.4 | 3.4 | 1.7 | 2.8 | 3.38 | 4.55 | 4.55 | 6.35 | 9.09 | ||||||
| 32 | 1 1/4” | 42.16 | 3.6 | 1.7 | 2.8 | 3.56 | 4.85 | 4.85 | 6.35 | 9.7 | ||||||
| 40 | 1 1/2” | 48.26 | 3.7 | 1.7 | 2.8 | 3.68 | 5.08 | 5.08 | 7.14 | 10.2 | ||||||
| 50 | 2” | 60.33 | 3.9 | 1.7 | 2.8 | 3.91 | 5.54 | 5.54 | 9.74 | 11.1 | ||||||
| 65 | 2 1/2” | 73.03 | 5.2 | 2.1 | 3.1 | 5.16 | 7.01 | 7.01 | 9.53 | 14 | ||||||
| 80 | 3” | 88.9 | 5.5 | 2.1 | 3.1 | 5.49 | 7.62 | 7.62 | 11.1 | 15.2 | ||||||
| 90 | 3 1/2” | 101.6 | 5.7 | 2.1 | 3.1 | 5.74 | 8.08 | 8.08 | ||||||||
| 100 | 4” | 114.3 | 6 | 2.1 | 3.1 | 6.02 | 8.56 | 8.56 | 11.1 | 13.5 | 17.1 | |||||
| 125 | 5” | 141.3 | 6.6 | 2.8 | 3.4 | 6.55 | 9.53 | 9.53 | 12.7 | 15.9 | 19.1 | |||||
| 150 | 6” | 168.3 | 7.1 | 2.8 | 3.4 | 7.11 | 10.97 | 11 | 14.3 | 18.3 | 22 | |||||
| 200 | 8” | 219.1 | 8.2 | 2.8 | 3.8 | 6.4 | 8.18 | 10.3 | 12.7 | 12.7 | 15.1 | 19.3 | 20.6 | 23 | 22.2 | |
| 250 | 10” | 273.1 | 9.3 | 3.4 | 4.2 | 6.4 | 9.27 | 12.7 | 12.7 | 15.1 | 19.3 | 21.4 | 25.4 | 28.6 | 25.4 | |
| 300 | 12” | 323.9 | 9.5 | 4 | 4.6 | 6.4 | 10.3 | 14.3 | 12.7 | 17.5 | 21.4 | 25.4 | 28.6 | 33.3 | 25.4 | |
| 350 | 14” | 355.6 | 9.5 | 4 | 4.8 | 6.4 | 7.9 | 11.1 | 15.1 | 12.7 | 19.1 | 23.8 | 27.8 | 31.8 | 35.7 | |
| 400 | 16” | 406.4 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 12.7 | 16.7 | 12.7 | 21.4 | 26.2 | 31 | 36.5 | 40.5 | |
| 450 | 18” | 457.2 | 9.5 | 4.2 | 4.8 | 6.4 | 7.9 | 14.3 | 19.1 | 12.7 | 23.8 | 29.4 | 34.9 | 39.7 | 45.2 | |
| 500 | 20” | 508 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 15.1 | 20.6 | 12.7 | 26.2 | 32.5 | 38.1 | 44.5 | 50 | |
| 550 | 22” | 558.8 | 9.5 | 4.8 | 5.5 | 6.4 | 9.5 | 22.2 | 12.7 | 28.6 | 34.9 | 41.3 | 47.6 | 54 | ||
| 600 | 24” | 609.6 | 9.5 | 5.5 | 6.4 | 6.4 | 9.5 | 17.5 | 24.6 | 12.7 | 31 | 38.9 | 46 | 52.4 | 59.5 | |
| 650 | 26” | 660.4 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
| 700 | 28” | 711.2 | 9.5 | 7.9 | 13 | 12.7 | ||||||||||
| 750 | 30” | 762 | 9.5 | 6.4 | 7.9 | 7.9 | 13 | 12.7 | ||||||||
| 800 | 32” | 812.8 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
| 850 | 34” | 863.6 | 9.5 | 7.9 | 13 | 17.5 | 12.7 | |||||||||
| 900 | 36” | 914.4 | 9.5 | 7.9 | 13 | 19.1 | 12.7 |
Supplier of 4130 Tubing all over India
| Indian Cities We Supply 4130 Tubing & Tubing | |||||
|---|---|---|---|---|---|
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
| Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
| Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
| Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
| Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | Kanpur |
Exporter of 4130 Tubing all over the world
| Countries We Export 4130 Tubing & Tubing | |||||||
|---|---|---|---|---|---|---|---|
| Argentina | USA | Saudi Arabia | Nigeria | Russia | India | Syria | Hungary |
| Bolivia | Canada | Iran | Algeria | Norway | Singapore | Jordan | Albania |
| Brazil | Mexico | Iraq | Angola | Germany | Malaysia | Cyprus | Austria |
| Chile | Panama | UAE | South Africa | France | Indonesia | Greece | Switzerland |
| Venezuela | Costa Rica | Qatar | Libya | Italy | Thailand | Czech Republic | Slovakia |
| Colombia | Puerto Rica | Bahrain | Egypt | UK | Vietnam | Portugal | Finland |
| Ecuador | Trinidad And Tobago | Oman | Sudan | Spain | South Korea | Bangladesh | Ireland |
| Guyana | Jamaica | Kuwait | Equatorial Guinea | Ukraine | Japan | Mayanmar | Croatia |
| Paraguay | Bahamas | Turkey | The Republic Of Congo | Netherlands | Sri Lanka | Taiwan | Slovenia |
| Uruguay | Denmark | Yemen | Gabon | Belgium | Maldives | Cambodia | Malta |